Fluke 1000FLT Fluorescent Light Tester

Performs all 5 essential tests with 1 compact tool that is Fluke 1000FLT for you. The result is always spot on.

Save time and reduce costs by using the only tester that performs all 5 essential lighting tests in less than 50 seconds.

Overview

Performs all 5 essential tests with 1 compact tool that is Fluke 1000FLT for you. The result is always spot on.

Save time and reduce costs by using the only tester that performs all 5 essential lighting tests in less than 50 seconds.

All those you can measure Lamp test, ballast test, non-contact voltage, ballast-type test pin and continuity test.

If you need to keep large numbers of fluorescent lights shining, the Fluke 1000FLT is the tool you are looking for.

Survives on-the-job handling. Bright indicator light plus an audible alert Very easy to maintain. Fluke 1000FLT is a very dependable product for your job site. Done your job faster and safer with this brand new fluke product.

Features

  • Saves time and reduces costs: Perform all 5 essential lighting tests in under 30 seconds to pinpoint problems and verify operation when done
  • Survives on-the-job handling: Drop-tested to survive from a six foot (two meter) ladder
  • Easy to use: Bright indicator light plus audible alert
  • Built to last, easy to maintain: The Fluke 1000FLT’s extendable test rod is all metal and very rugged. But should the need arise, this test rod is easily replaced
  • Long life: Backed with a three-year warranty

Specifications

General Specifications
Lamp test max output 3000 V peak
Ballast test 20 kHz
Ballast type descriminator ≤3m (10 feet) distance
Pin continuity test < 1 kΩ
NCV (VoltAlert™) 85 to 400 V AC
45 a 67 Hz
≤10 cm (4 in) distance
Environmental Specifications
Temperature Operating: -10 °C to +50 °C (14 °F to +122 °F)
Storage: -40 °C to +60 °C (-40 °F to +140 °F)
Relative humidity 85% maximum
Safety Specifications
Safety rating IEC 61010-1, pollution degree 2
Mechanical and General Specifications
Size 21.5 cm x 3.0 cm x 6.5 cm (8.5 x 1.2 x 2.6 in)
Weight 0.37 kg (0.80 lb.)
Battery type 4 x AA alkaline IEC LR6
Battery life 40 hours
Auto power off 20 minutes after non-use
Low battery indicator Power button light blinks when power is low (typically 85% of capacity depleted)
Operating altitude <2000 m
Electromagnetic environment EN 61326-1: Portable
Electromagnetic compatibility CE IEC: CISPR 11: Grupo 2, clase A
Group 2 contains all ISM RF equipment in which radio-frequency energy in the frequency range 9 kHz to 400 GHz is intentionally generated and used or only used, in the form of electromagnetic radiation, inductive and/or capacitive coupling, for the treatment of material or inspection/analysis purposes
Class A equipment is suitable for use in non-domestic locations and/or directly connected to a low-voltage power supply network
EE.UU. FCC part 15, subpart B: exempt as test equipment per clause 15.103
Korea only Clas A Equipment (Industrial Broadcasting & Communication Equipment)1
1 This product meets requirements for industrial (Class A) electromagnetic wave equipment and the seller or user should take notice of it. This equipment is intended for use in business environments and not to be used in homes.
Resistance to impact 2 meter drop

Includes

  • Quick reference guide
  • 4 AA alkaline batteries
  • H1000 holster

Resources

Fluke 1000FLT Fluorescent Light Tester – Catalog    Download

Accessories

 

  • Quick reference guide
  • 4 AA alkaline batteries
  • H1000 holster

Reviews

There are no reviews yet.

Be the first to review “Fluke 1000FLT Fluorescent Light Tester”

Your email address will not be published. Required fields are marked *