Fluke-113 Basic Multimeter

Fluke 113 Digital Multimeter gives users the means to quickly and easily do basic meter set and reconnect testing.

Overview

One hand operation!!!

Fluke 113 Basic Multimeter done the tricks for you. Fluke 113 is a must-have for every toolbox.Very easy to view and large backlit display.

Fluke 113 Digital Multimeter gives users the means to quickly and easily do basic meter set and reconnect testing.

This meter is simple to use and has wonderful features. Solve your electrical problems so easily.

Fluke 113 has significant improvements over other digital multimeters available on the market, users can simultaneously test for voltage or continuity.

The Min/Max function lets you record signal fluctuations.

Fluke 113 provides both auto and manual ranging capabilities also can perform diode tests.

With features such as conformance to the latest safety standards, backlight, and a much larger display that’s easier to view.

Features

  • VCHEK™ LoZ low impedance measurement function to simultaneously test for voltage or continuity
  • True RMS for accurate AC measurements on non-linear loads
  • A large backlit display allows for easy visibility in low-lit areas
  • Record signal fluctuations using the Min/Max function
  • Diode test for testing general-purpose germanium, silicon, and power diodes
  • Integral holster with probe holders for easy storage
  • Auto and Manual ranging for added user functionality
  • Meets Measurement Category CAT III 600 V and Category IV 300 V standards for a higher level of safety
  • The optional TPAK magnetic hanger allows the user hands-free flexibility

Specifications

Specifications
VCHEK 1,2,3
Range  6.000 V
 60.00 V
 600.0 V
Resolution  0.001 V
 0.01 V
 0.1 V
Accuracy  DC, 45 to 500 Hz:2.0 % + 3
 500 Hz to 1 kHz: 4.0 % + 3
Diode test 4
Range  2.000 V
Resolution  0.001 V
Accuracy  2.0 % + 3
Continuity4
Accuracy  Beeper on < 20 Ω, off > 250 Ω; detects opens or shorts of 500 μs or longer
4
Range  600.0 Ω
 6.000 kΩ
 60.00 kΩ
Resolution  0.1 Ω
 0.001 kΩ
 0.01 kΩ
Accuracy  0.9 % + 2
 0.9 % + 1
 0.9 % + 1
Capacitance4
Range  1000 nF
 10.00 μF
 100.0 μF
 9999 μF
Resolution  1 nF
 0.01 μF
 0.1 μF
 1 μF
Accuracy  1.9 % + 2
 1.9 % + 2
 1.9 % + 2
 100 μF – 1000 μF: 1.9 % + 2
 > 1000 μF: 5 % + 20

Notes:
1 All VChek voltage ranges are specified from 60 counts to 100 % of range. Because inputs below 60 counts are not specified, it is possible and normal for this and other True-RMS meters to display non-zero readings when the test leads are disconnected from a circuit or are shorted together.
2 Crest factor of ≤ 3 at 4000 counts, decreasing linearly to 1.5 at full scale.
3 Minimum measureable input in VCHEK autorange is 3 V dc. For measurements below 3 V dc, push Range button twice to get to 6 V dc manual range.
4 After measuring voltage, a wait time of 1 minute is required to maintain accuracy of ohms, capacitance, diode test, and continuity.

 

Specifications
Maximum voltage between any terminal and earth ground
 600 V
Display
 3 3/4-digits, 6000 counts, updates 4/sec
Operating temperature
 -10 °C to 50 °C (14 °F to 122 °F)
Storage temperature
 -40 °C to 60 °C (-22 °F to 140 °F)
Temperature coefficient
 0.1 x (specified accuracy)/°C (< 18 °C or > 28 °C)
Operating altitude
 2,000 m
Storage altitude
 10,000 m
Relative humidity
 95 % to 30 °C
 75 % to 40 °C
 45 % to 50 °C
Battery type
 9 Volt Alkaline, ANSI 1604A / IEC 6F22
Battery life
 Alkaline: 300 hours typical, without backlight
Shock
 1 Meter drop per IEC 61010-1-2001
Vibration
 Per MIL-PRF-28800 for Class 2 instrument
Size (HxWxL)
 167.1 mm X 85.1 mm X 46.0 mm (6.58 in X 3.35 in X 1.81 in)
Weight
 13.0 oz (404 g)
Safety
 Complies with ANSI/ISA 82.02.01 (61010-1) 2004, CAN/CSA-C22.2 No 61010-1-04, UL 61010-1 (2004) and IEC/EN 61010-1 2nd Edition for measurement Category IV, 600 V, Pollution Degree 2, EMC EN61326-1
EMI regulations
 Complies with FCC Part 15, Class B

 

Specifications
VCHEK
Input Impedance (Nominal)  ~3 kΩ < 300 pF
VCHEK
Common Mode Rejection Ratio (1 kΩ Unbalanced)  > 60 dB at dc, 50 or 60 Hz
Ω
Open Circuit Test Voltage  < 2.7 V dc
Full Scale Voltage  < 0.7 V dc
Diode test
Open Circuit Test Voltage  < 2.7 V dc
Full Scale Voltage  2.000 V dc
Short Circuit Current  < 350 μA
Diode test
Short Circuit Current  < 1.0 mA

Includes

What’s included with the Fluke 113

  • Fluke 113 Basic Multimeter

 

 

Resources

Fluke-113 Basic Multimeter – Catalog    Download

Accessories

Test Leads & Probes
-
Fluke AC220 SureGrip Alligator Clips AC220

Designed to improve steadiness with rubber overmolded surfaces and finger-hugging curves.


-
Fluke TL220 Suregrip Industrial Test Lead Set TL220

Includes the Fluke AC220, Fluke TP220, and Fluke TL224.


-
Fluke TL223 SureGrip Electrical Test Lead Set TL223

Set includes Fluke AC220, TP1, TL224.


-
Fluke TLK-220 US SureGrip Industrial Test Lead Kit TLK-220

Set includes AC220, AC285, TP220, and TL224 in zippered vinyl carry case with moveable divider.


-
Fluke TLK291 fused test probe set TLK291

For use with Fluke multimeters and test leads.


Carrying Cases
-
Fluke C50 Meter Case C50

Case with Full Wrap-around zipper & elastic holding band.


-
Fluke C35 Soft Carrying Case C35

For use with Fluke Multimeters.


Mounts
-
Fluke TPAK ToolPak Magnetic Meter Hanger ToolPak

Attaches to back of a Fluke 110/170/180 Series Meter, 20/70-III with integrated holster (with adapter), 724/725, and 50 Series II.

Reviews

There are no reviews yet.

Be the first to review “Fluke-113 Basic Multimeter”

Your email address will not be published. Required fields are marked *