Fluke 1750 Three-Phase Power Quality Logger

Never miss catching an unsettling have emotional impact taking into account the

selective limit loose estimation framework, it’s programmed.

Catch each estimation, each occasion, harshly each cycle, all the time following the Fluke 1750 Power Recorder. Extraordinary exactness what’re more, goals manages to pay for finish permeability into your opening or dissemination framework.

Overview

Fluke 1750 Three-Phase Power Quality Logger
Record all gift feel parameters, all cycle, forever and a day

Setting taking place a capacity character analyzer to seize detailed knack environment data has never been easier than it is taking into account the Fluke 1750. The forlorn things you craving to know are the system voltage, frequency and the triumph configuration (delta or wye).

The analyzer also captures the most important data for going on to 30 days without losing the most important details. These gift meters automatically tape all gift character parameter and have an effect on, upon every one of the cycle all the times.

Once the data is captured download via Ethernet or directly to 2GB SD card (without the showing off of any option device). The Fluke 1750 features a wireless stomach panel for viewing measurements, data and environment going on, implemented via a tablet computer using Bluetooth communication.

Power quality that meets the standard: All measurements
comply with IEC61000-4-30 standards for correct evaluation
of all measured values including voltage, current, power, harmonics,
flicker etc.

• Ethernet interface: Included Windows 10 tablet allows for quick
setup and verification with waveform displays, meter screens,
and phasor diagrams.
• Quick and reliable configuration: Windows 10 tablet “front
panel interface” provides the ability to verify setup without
a laptop along with a window into what the instrument is
recording.
• Threshold-free setup: Apply thresholds after data is collected
with Fluke Power Analyze Software so there is no need to worry
about missed information due to incorrect set-up.
• Captures everything: Cross-channel and current triggering
capture every measurement, on every channel, every time.
• Intuitive PC software: Easily analyze data and generate reports.
Automated EN50160 reporting and compliance running directly
on the supplied Windows 10 tablet.
• Plug and play: Set up in minutes with self-identifying current
probes and single-lead voltage connections.
• No need to reconnect wires: Swap channels internally with the
Windows 10 front panel or PC when connections are not correct.
• Measure every parameter: voltage and current on three phases,
neutral, and ground.
• 5 MHz, 8000 Vpk waveform capture: Get a detailed picture of
even the shortest events.
• Quickly retrieve data: With included SD memory card or via the
100BaseT Ethernet connection.

Features

Fluke 1750 Three-Phase Power Quality Logger

  • Allows you to easily analyze data and generate reports in intuitive PC software with automated EN50160 reporting and compliance
  • Allows you to apply thresholds after data is collected, with Fluke Power Analyze Software–no need to worry about missed information due to incorrect setups
  • Captures every measurement, on every channel, every time with cross-channel, and current triggering capture
  • Automatically creates standard or customized reports with Auto Report and exports reports to almost any format including RTF (Rich Text Format) for editing in Microsoft Word.
  • Offers 5 MHz, 8000 Vpk waveform capture to provide a detailed picture of even the shortest events
  • Sets up in minutes with self-identifying current probes and single-lead voltage connections
  • Allows you to swap channels internally with the wireless tablet or PC when connections are not correct. No need to reconnect wires
  • Measures every parameter voltage and current on three phases, neutral, and ground
  • Quickly retrieves data with included SD memory card or via the 100BaseT high-speed Ethernet connection.
  • Three-phase power quality recorder with an Android tablet wireless front panel interface
  • Complies with IEC 61000-4-30 Class-A standards for correct evaluation of all measured values
  • Supports quick and reliable configuration even in awkward test locations with the wireless interface that provides a window into what the instrument is recording

Specifications

Fluke 1750 Three-Phase Power Quality Logger

Technical Specifications
Power quality measurement standards Conformance IEC 61999-1-4 Class 1, IEC 61000-4-30 Class A, S or B depending on measurement function, IEEE519, IEEE1159, IEEE1459 and EN50160
Clock/calendar Leap years, 24-hour clock
Real-time clock accuracy Not more than ±1 s/day
Internal memory capacity for data At least 2 GB
Maximum recording period At least 31 days
Measurement time control Automatic
Maximum number of events Limited only by the size of the internal memory
Power requirements 100 to 240 V rms ±10%, 47-63 Hz, 40 W
Operating time during interruptions (internal UPS operation) 5 minutes per interruption, 60 minutes total operating time without recharging
Dimensions 215 x 310 x 35 mm (8.5 x 12.2 x 3.5 in)
Mass (weight) 6.3 kg (14 lb)
Input Measurement types One Phase Plus Neutral, One Phase IT No Neutral, One Phase Split Phase, Three Phase Wye, Three Phase Delta, Three Phase IT, Three Phase High Leg, Three Phase Open Leg, 2 Element Delta, 21/2 Element Wye
Input channels Voltage: 4 channels, AC/DC
Current: 5 channels
Voltage channels Input resistance: 2 MΩ
Input capacitance: < 20 pF
Current input characteristics 2 V rms = full scale, 1 MΩ Input Impedance for ferro CTs, low impedance for Flexi-CTs
Measuring method Simultaneous digital sampling of voltage and current. Digital PLL synchronized sampling, internal frequency reference used during voltage drops.
Synchronization and sampling PLL-synchronization source The PLL synchronizes to the A-N voltage for wye power types, and to the A-B voltage for delta power types. All listed power types can be characterized as either wye or delta.
PLL lock range 42.5 to 69 Hz
Sampling frequency Voltage and current: 256 samples/cycle Inter-harmonics per IEC 61000-4-7: 2 560 points/10 cycles (50 Hz), 3072 points/12 cycles (60 Hz) Transient Voltage: 5 MHz
A/D resolution Voltage and current: 24 bits
Transient voltage: 14 bits
Voltage and current measurements Voltage measurement range AC voltage: 1000 V rms ±10% over range
DC voltage: ±1000 V + 10% over range
Voltage crest factor 3 or less
Current measurement range Depends on current probe used
Current crest factor 4 or less
RMS voltage Measurement type True rms calculated continuously: every cycle, every 1/2 cycle, and every 10 or 12 cycles at 50 or 60 Hz respectively, as required by IEC 61000-4-30.
Measurement uncertainty AC: ±0.2% reading ±0.1% full scale, above 50 V rms
DC: ±0.5% reading ±0.2% full scale, above 50 V dc
RMS current Measurement type True RMS calculated continuously: every cycle, every 1/2 cycle, and every 10 or 12 cycles at 50 or 60 Hz respectively, as required by standards
Transient voltage (impulse) Measurement type Waveshape sampling
Full scale 8000 V pk
Sample resolution 200 nS
Measurement uncertainty ±5% reading ±20 V (test parameters: 1000 V DC, 1000 V rms, 100 kHz)
Voltage swell (rms swell) Measurement type True RMS (one cycle calculation by overlapping each half cycle – voltage between lines is measured for 3P3W lines and phase voltage is measured for 3P4W lines)
Displayed data Amplitude and duration of swell
Measurement Same as rms voltage
Voltage dip (rms sag) Measurement type True RMS (one cycle calculation by overlapping each half cycle – voltage between lines is measured for 3P3W lines and phase voltage is measured for 3P4W lines)
Displayed data Amplitude and duration of dip or interruption
Measurement Same as rms voltage
Voltage dropout (interruption) Measurement type Same as voltage dip
LAN interface Connector RJ-45
Speed and type 10/100 Base-T, auto MDIX
Communications protocol TCP/IP over Ethernet
Wireless controller interface Connection wireless (2.4 GHz radio)
Speed up to 700 kbit/second
Communications protocol Bluetooth SPP
Power Measurements
Power, battery life Measurement type True RMS calculated continuously: every cycle, and every 10 or 12 cycles at 50 or 60 Hz respectively, as required by standards
Frequency Measurement range 42.5 to 69 Hz
Measurement source Same as PLL synchronization source
Measurement accuracy ±10 mHz (10 to 110% of range, with sine wave)
Power factor Measurement range 0.000 to 1.000
Measurement accuracy ±1 digit from the calculation of each measured value (±3 digits for total)
Displacement power factor Measurement method Calculated from the phase difference between voltage fundamental and current fundamental
Measurement range – 1.000 (leading) to + 1.000 (lagging)
Measurement accuracy ±0.5% reading ±2% full scale ±1 digit
Voltage unbalance and phase sequence Measurement method Positive sequence voltage divided by negative sequence voltage, per IEC 61000-4-30
Harmonic voltage and current Analysis window rectangular
Analysis order 1st to 50th order
Measurement accuracy Voltage / Current: 1st to 20th orders: ±0.5% reading ±0.2% full scale, 21st to 50th orders: ±1% reading ±0.3% full scale (current sensor accuracy must be included for current and power)
Measurement method IEC 61000-4-7
Inter-harmonic voltage and current (intermediate harmonics) Analysis window rectangular
Analysis orders 1.5 to 49.5th order
Measurement method IEC 61000-4-7
Flicker Measurement method IEC 61000-4-15
Plt for 2 hours and Pst for 10 minutes
Measuring range 0,1 to 5 (25) depending on voltage level, modulation and frequency
Environmental Specifications
Environmental Operating environment Indoors or in covered area outdoors, up to 2,000 m altitude
Storage temperature and humidity -20°C to 50°C, 80% RH max, non-condensing
Operating temperature and humidity 0°C to 40°C, 80% RH max, non-condensing
Maximum rated working voltage Voltage terminals 1100 V rms
Voltage durability 5550 V rms AC for 1 minute, between voltage input terminals, voltage input terminals and current probes, and voltage input terminals and case (50/60 Hz, 1 mA sense current)
Enclosure protection IP30 (per EN 60529)
Standards EMC EN 61326-1:1997+A1:1998 Class A
EN 61000-3-2:1995+A1:1998+A2:1998
EN 61000-3-3:1995
Safety EN 61010-1 2 nd Edition; 2 000
Voltage input unit: Contamination Level 2 , Overvoltage Category 1000 V CAT III, 600 V CAT IV (anticipated overvoltage: 8000 V)

Includes

Fluke 1750 Three-Phase Power Quality Logger

Includes:

  • Fluke Power View and Fluke Power Analyze software
  • 5 Test leads and clips
  • 1750 acquisition unit
  • 1750 handheld tablet
  • 4 x 400A current probes (3140)
  • Printed Getting Started manual
  • 2GB SD Memory card (larger cards not compatible)
  • Power cord with international plug set
  • Ethernet cable
  • Color localization set
  • Product CD with software and user manual PDF
  • CS 1750/1760 Rugged transit soft case.

Resources

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Sed mollis placerat accumsan. Phasellus a purus eu odio blandit imperdiet. Integer eu porta tellus. Pellentesque ligula nunc, vestibulum vel diam id, dignissim ultricies neque. Nullam laoreet dignissim dui. Praesent non eros id nisi posuere malesuada vitae quis nisl. Etiam mattis leo porta justo suscipit condimentum. Aliquam nec urna pharetra, pellentesque neque vel, aliquet libero. Phasellus hendrerit, elit ac sollicitudin venenatis, arcu metus semper urna, eu rutrum odio tellus in nisi. Aenean venenatis mauris enim. Mauris commodo nec tortor in suscipit. Proin lobortis ligula at volutpat rhoncus. Pellentesque in porta sapien. Donec semper, magna eu posuere sagittis, tellus nulla dignissim nibh, sed rutrum ante leo id neque.

Accessories

Fluke 1750 Three-Phase Power Quality Logger

Reviews

There are no reviews yet.

Be the first to review “Fluke 1750 Three-Phase Power Quality Logger”

Your email address will not be published. Required fields are marked *