Fluke 190-102/S ScopeMeter® Test Tool

The Fluke ScopeMeter 190-102/S consolidate the most noteworthy security evaluations and tough transportability subsequent to the elite of a seat oscilloscope.

625 GS/s inspecting rate, 60MHz data transmission as soon as 2 input channels and DMM for enlightened electrical and electro-mechanical applications.

Category:

Overview

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Sed mollis placerat accumsan. Phasellus a purus eu odio blandit imperdiet. Integer eu porta tellus. Pellentesque ligula nunc, vestibulum vel diam id, dignissim ultricies neque. Nullam laoreet dignissim dui. Praesent non eros id nisi posuere malesuada vitae quis nisl. Etiam mattis leo porta justo suscipit condimentum. Aliquam nec urna pharetra, pellentesque neque vel, aliquet libero. Phasellus hendrerit, elit ac sollicitudin venenatis, arcu metus semper urna, eu rutrum odio tellus in nisi. Aenean venenatis mauris enim. Mauris commodo nec tortor in suscipit. Proin lobortis ligula at volutpat rhoncus. Pellentesque in porta sapien. Donec semper, magna eu posuere sagittis, tellus nulla dignissim nibh, sed rutrum ante leo id neque.

Features

Fluke 190-102/S ScopeMeter® Test Tool

  • Two electrically isolated inputs
  • CAT III 1000 V / CAT IV 600 V safety rated
  • 100 MHz bandwidth model
  • 1.25 GS/s
  • Deep memory: 10,000 samples per channel waveform capture so you can zoom in on the details
  • Dedicated 5000 Count digital multimeter in 2-channel models
  • Connect-and-View continuous auto-trigger, single shot, pulse width, and video triggering
  • ScopeRecord roll mode, capture waveform sample data for up to 48 hours
  • TrendPlot, trend measurement readings for up to 22 days
  • Advanced automatic measurements, power (Vpwm, VA, W, PF) and time (mAs, V/s, w/s)
  • IP-51 rated for dust and drip proof to withstand harsh environments
  • Isolated USB ports for memory devices and PC connectivity
  • Li-Ion battery for extended operating timespan: up to 4 hours (BP290 included standard) or up to 8 hour with optional BP291
  • Charge spare battery using optional external battery charger (EBC290)
  • Easy-access battery door to make it easy to swap batteries
  • A handy slot to tether and lock down the oscilloscope while unattended using a standard Kensington® lock
  • Circuit voltage/current overloading
  • Signal timing measurements and synchronization issues
  • Attenuation/input impedance mismatch
  • Signal fluctuation/drift
  • Test for harmonics, transients and loads at the three-phase power input
  • Troubleshoot dc to ac converters for faulty IGBT gates or filter circuits
  • Test PWM output for reflections and transients or voltage unbalance
  • Stores events like motion profiles, UPS, power supply, and motor start-ups
  • With the Stop-on-Trigger mode, the ScopeMeter 190-102/S automatically recognizes a power failure and stores the waveform data preceding it
  • With the waveform zoom (up to 100x) you can look at the smallest details, like individual power cycles
  • Plotting minimum and maximum peak values and average over time up to 22 days
  • Plotting any combination of voltages, amps, temperature, frequency and phase for all four inputs, all with time and date stamp to pinpoint faults

Specifications

Fluke 190-102/S ScopeMeter® Test Tool

Specifications
Bandwidth 100 MHz
Number of channels 100 MHz: 2 channels
Real-time sample rate 1.25 GS/s
Inputs 2 scope plus DMM input
Independently floating isolated inputs Up to 1000 V CAT III/600 V CAT IV between inputs, references and ground
Timebase range 5 ns – 2 min/div
Input sensitivity 2 mV-100 V/div
Trigger types Connect-and-View™, Free Run, Single Shot, Edge, Delay, Dual Slope, Video, Video Line, Selectable pulse width, N-Cycle
Trigger source Any scope input channel
Glitch capture 8 ns
Scope measurements Cursor: 7
Automatic: 30
Maximum record length ScopeRecord mode: 30,000 pts
Scope mode: 10,000 pts per input
Persistence Digital persistence giving analog oscilloscope-like waveform decay
Waveform compare Waveform reference with automatic Pass/Fail testing
DMM Specification
Meter inputs (also used as External Trigger Input for the Oscilloscope Mode) 4 mm banana inputs, fully isolated from scope inputs and from scope ground
Maximum resolution 5000 counts
Measurements VDC, VAC rms, VAC + DC rms, Resistance, Continuity, Diode Test, Current (through clamp or shunt), Temperature °C or °F (using optional converter)
Memory Screen + Setup: 30
> Recording: 10
Display 153 mm full color LCD with fast update rate
Environmental Specifications
Operating temperature 0 °C to 40 °C Including Batteries
0 °C to 50 °C Excluding Batteries
Storage temperature -20 °C to +60 °C
Operating altitude Up to 2,000 m (6666 ft) for CAT IV 600 V, CAT III 1000 V
Up to 3,000 m (10,000 ft) for CAT III 600 V, CAT II 1000 V
Safety Specifications
Electrical safety 1,000 V CAT III/600 V CAT IV (EN61010-1)
Mechanical and General Specifications
Size 270 x 190 x 70 mm
Weight 2.2 kg
Warranty 3-years on main instrument, 1-year on accessories
Li-Ion battery BP290 2400 mAh battery up to 4 hours included standard
Included Accessories
Two channel models VPS410 Voltage Probe Sets (one red, one blue)
TL175 TwistGuard™ safety designed Test Lead Set (red and black)
BC190 Battery Charger/mains Adapter
BP290 2400 mAh Li-ion Battery
> Handstrap (affixed to instrument)
Hangstrap
Multi-Language User Manuals on CD-Rom
FlukeView ScopeMeter® demo package (restricted functionality)
USB Interface Cable

Includes

Models: Fluke 190-102/S ScopeMeter® Test Tool

Includes:

  • Color ScopeMeter® 100 MHz
  • 2 channels
  • C290 Hard-shell Carrying Case
  • DMM/Ext.input
  • Windows® software
  • SW90W FlukeView for ScopeMeter Test Tool

Resources

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Sed mollis placerat accumsan. Phasellus a purus eu odio blandit imperdiet. Integer eu porta tellus. Pellentesque ligula nunc, vestibulum vel diam id, dignissim ultricies neque. Nullam laoreet dignissim dui. Praesent non eros id nisi posuere malesuada vitae quis nisl. Etiam mattis leo porta justo suscipit condimentum. Aliquam nec urna pharetra, pellentesque neque vel, aliquet libero. Phasellus hendrerit, elit ac sollicitudin venenatis, arcu metus semper urna, eu rutrum odio tellus in nisi. Aenean venenatis mauris enim. Mauris commodo nec tortor in suscipit. Proin lobortis ligula at volutpat rhoncus. Pellentesque in porta sapien. Donec semper, magna eu posuere sagittis, tellus nulla dignissim nibh, sed rutrum ante leo id neque.

Accessories

Fluke 190-102/S ScopeMeter® Test Tool

Reviews

There are no reviews yet.

Be the first to review “Fluke 190-102/S ScopeMeter® Test Tool”

Your email address will not be published. Required fields are marked *