Fluke 355 True RMS 2000 A Clamp Meter

Rated 4.83 out of 5 based on 6 customer ratings
(6 customer reviews)

One of the advantages of owning a Clamp Meter is the fact that you are able to measure the electric current that passes through a device without the need of breaking any circuits.

Overview

Fluke 355 True RMS 2000 A Clamp Meter

Adaptable and tough apparatuses for applications behind high flows

Unhesitatingly take in the works on dependable readings behind the True RMS, Fluke 355 advanced brace meter the device of decision for tall current cinch upon amp meter estimation going on to 2000 A.

The postscript broad jaw effectively cinches on the subject of colossal conductors, regularly found in high-current applications. The added uncompromising want and CAT IV 600 V, CAT III 1000 V appraisals quantity uphill an adding component of client insurance gone taking powerful estimations.

Exact peak estimations can be taken utilizing the in-surge current mode, absolute for engines and inductive burdens. The 355 additionally events voltage and obstruction, making this an absolute clip meter for utilities, electrical contractual workers and unbiased administration specialists.

Features

Fluke 355 True RMS 2000 A Clamp Meter

  • Reliably handle a wide range of high-current applications with 2000 AAC + DC True RMS, 1400 AAC, and 2000 A DC
  • The large 58 mm (2.3 in) jaw capacity is suitable for large or multiple conductors
  • In-rush current measurement captures ‘power-on’ surge current with accuracy and repeatability
  • Accurately measure frequency up to 1 kHz for optimum troubleshooting
  • Use the display hold feature to capture readings even when the display cannot be viewed
  • CAT IV 600 V, CAT III 1000 V rating for added user protection
  • A large backlit display allows for easy visibility in low-lit areas
  • The high voltage measurement of 1000 VAC + DC True RMS, 600 VAC, and 1000 V DC allows the user to perform multiple tests with only one tool
  • Resistance to 400K ohms coupled with a continuity beeper provides the convenience of a multimeter in a clamp meter.
  • Quickly analyze readings using the MIN, MAX, and AVG functions
  • Use the low-pass filter to smooth out noisy loads and stabilize readings

Specifications

Fluke 355 True RMS 2000 A Clamp Meter

Electrical Specifications
Current measurement DC and AC 10 Hz to 100 Hz Range 40 A / 400 A / 2000 A / 1400 AC rms
Resolution 10 mA / 100 mA / 1 A
Accuracy A: 1.5% rdg + 15 digits
A: 1.5% rdg + 5 digits
Trigger level for Inrush 0.50 A / 5.0 A / 5 A
Trigger level for Hz filter OFF 2.50 A / 2.5 A / 8 A
Trigger level for Hz filter ON 0.50 A / 2.5 A / 8 A
Crest Factor (50/60 Hz) Range 40 A / 400 A / 2000 A / 1400 AC rms
Crest Factor1 2 @ 33 A, 2.4 @ 27 A
2 @ 330 A, 2.4 @ 270 A
2 @ 1000 A, 2.4 @ 833 A
Current measurement AC 100.1 Hz to 1 kHz Range 40 A / 400 A / 2000 A; 1400 AC rms
Resolution 10 mA / 100 mA / 1 A
Accuracy 10 A: 3.5% rdg + 15 digits
10 A: 3.5% rdg + 5 digits
Trigger level for Inrush 0.50 A / 5.0 A / 5 A
Trigger level for Hz filter OFF 2.50 A / 2.5 A / 8 A
Trigger level for Hz filter ON 0.50 A / 2.5 A / 8 A
Voltage measurement DC and AC 10 Hz to 100 Hz
(600 V and 1000 V ranges have 10% over range to 660 V and 1100 V respectively.)
Range 4 V / 40 V / 400 V / 600 V AC rms / 1000 VDC
Resolution 1 mV / 10 mV / 100 mV / 1 V
Accuracy 1% rdg + 10 digits
1% rdg + 5 digits
Trigger level for Hz filter OFF 0.25 V / 6 V
Trigger level for Hz filter ON 0.25 V / 6 V
Voltage measurement AC 100.1 Hz to 1 kHz
(600 V and 1000 V ranges have 10% over range to 660 V and 1100 V respectively.)
Range 4 V / 40 V / 400 V / 600 V ac rms
Resolution 1 mV / 10 mV / 100 mV / 1 V
Accuracy 3% rdg + 10 digits
3% rdg + 5 digits
Trigger level for Hz filter OFF 0.050 V / 0.25 V / 6 V
Trigger level for Hz filter ON 0.050 V / 0.25 V / 6 V
Ohms measurement Range 4 kΩ / 40 kΩ / 400 kΩ
Resolution 0.1 Ω / 1 Ω / 10 Ω / 100 Ω
Accuracy 1.5% + 5 digits
Continuity beeper On at ≤ 30 Ω
Off at ≥ 100 Ω
Frequency measurement Measurement range 5.0 Hz to 1 kHz
Resolution 0.1 Hz (15 Hz to 399.9 Hz); 1 Hz (400 Hz to 1 kHz)
Accuracy – 5.0 Hz to 100 Hz 0.2% + 2 counts
Accuracy – 100.1 Hz to 1 kHz 0.5% + 5 counts
Trigger level Refer to current and voltage tables
1. Add 2% to error spec for CF > 2
General Specifications
Batteries Six 1.5 V AA NEDA 15 A or IEC LR6
Battery life (with typical usage, backlight off) 100 hours
Test leads Rated to 1000 V
Weight .814 kg (1.8 lb)
Jaw size 58 mm (2.28 in)
Dimensions (L x W x D) 300 x 98 x 52 mm (12 x 3.75 x 2 in)
Safety rating IEC 61010-2-032, 600 V CAT IV, 1000 V CAT III
Environmental Specifications
Operating temperature 32°F to +122°F (0°C to +50°C)
Storage temperature -4°F to 140°F (-20°C to +60°C)
Operating humidity 0 to 95% (non-condensing)
Operating altitude 2000 m
Storage altitude 10,000 m
IP rating 42 (indoor use only)
Drop test requirements 1 m
EMI, RFI, EMC FCC part 15, IEC/EN 61326-1:1997 class B
IEC/EN 61326:1997 3 V/m, performance criteria B, EN61325
Temperature coefficients Current 0.1% of reading per °C outside 22°C to 24°C
Voltage 0.1% of reading per °C outside 22°C to 24°C

Includes

Models: Fluke 355 True RMS 2000 A Clamp Meter

Includes:

  • C43 soft carrying case
  • 6 AA batteries
  • TL224 1.5 m silicone rubber test leads
  • TP2 test probes
  • AC285 alligator clips
  • User manual

Resources

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Sed mollis placerat accumsan. Phasellus a purus eu odio blandit imperdiet. Integer eu porta tellus. Pellentesque ligula nunc, vestibulum vel diam id, dignissim ultricies neque. Nullam laoreet dignissim dui. Praesent non eros id nisi posuere malesuada vitae quis nisl. Etiam mattis leo porta justo suscipit condimentum. Aliquam nec urna pharetra, pellentesque neque vel, aliquet libero. Phasellus hendrerit, elit ac sollicitudin venenatis, arcu metus semper urna, eu rutrum odio tellus in nisi. Aenean venenatis mauris enim. Mauris commodo nec tortor in suscipit. Proin lobortis ligula at volutpat rhoncus. Pellentesque in porta sapien. Donec semper, magna eu posuere sagittis, tellus nulla dignissim nibh, sed rutrum ante leo id neque.

Accessories

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Sed mollis placerat accumsan. Phasellus a purus eu odio blandit imperdiet. Integer eu porta tellus. Pellentesque ligula nunc, vestibulum vel diam id, dignissim ultricies neque. Nullam laoreet dignissim dui. Praesent non eros id nisi posuere malesuada vitae quis nisl. Etiam mattis leo porta justo suscipit condimentum. Aliquam nec urna pharetra, pellentesque neque vel, aliquet libero. Phasellus hendrerit, elit ac sollicitudin venenatis, arcu metus semper urna, eu rutrum odio tellus in nisi. Aenean venenatis mauris enim. Mauris commodo nec tortor in suscipit. Proin lobortis ligula at volutpat rhoncus. Pellentesque in porta sapien. Donec semper, magna eu posuere sagittis, tellus nulla dignissim nibh, sed rutrum ante leo id neque.

6 reviews for Fluke 355 True RMS 2000 A Clamp Meter

  1. Rated 5 out of 5

    BASE TEXTILES LIMITED

    Are there Fluke meters with more features? Sure, but how much do you want to spend, and do you really need that one that makes your toast in the morning?

    For the price, this is a great, high quality and durable meter capable of keeping your butt from getting fried, and telling you just how fried you would be if you licked it.

    Seriously though, it’s a Fluke. If you need a meter, odds are you are looking at a Fluke anyway, so what are you expecting I will say?

  2. Rated 5 out of 5

    CATHWELD

    Fluke makes very good products and this one was no different. I use it daily as I am an HVAC Technician.

  3. Rated 5 out of 5

    CLIFTON GROUP OF COMPANIES

    great product! easy to use.

  4. Rated 5 out of 5

    CLOTHES CONNECTION INT’L

    Need the best, buy the best.

  5. Rated 5 out of 5

    COMILLA FASHIONS LTD

    I have always been too cheap to buy a name brand tester. But, over the years probably have spent 3 times more on garbage. Wish I’d have splurged right off.

    Haven’t used it a lot yet but, no complaints that amount to anything. It’s very nice.

  6. Rated 4 out of 5

    Saviour

    I am in Ghana how can l get your clamp meter to buy

Add a review

Your email address will not be published. Required fields are marked *