Fluke 368 FC Leakage Current Clamp Meter

Rated 5.00 out of 5 based on 2 customer ratings
(2 customer reviews)

Fluke 368 FC Leakage Current Clamp Meter save measurements to the Fluke Cloud and associate with an asset so your team can consult baseline, historical and current measurements from one location.

Overview

Fluke 368 FC Leakage Current Clamp Meter

Reduce downtime Find leakage currents Fluke 368.
Save measurements to the Fluke Cloud and associate with an asset so your team can consult baseline, historical and current measurements from one location.

One of the best things about fluke 368 FC that gives you always real result that you always looking for.

The Value is always spot on. Fluke 368 FC true-RMS leakage current clamp meter helps users detect, document, record and compare leakage current readings over time as a means of preventing unplanned downtime.

Fluke 368 FC has a large 40 mm diameter jaw for work with large conductors.

The clamp’s jaw is fully shielded to accurately capture very small leakage signals and to minimize external electromagnetic interference.

This latest model 368 FC is now available in Bangladesh. Fluke Bangladesh always on the top, for provides the best fluke products with affordable price in Bangladesh.

Features

Fluke 368 FC Leakage Current Clamp Meter

  • True-rms measurements for accuracy when measuring complex, non-sinusoidal waveforms
  • 40 mm jaw opening
  • Backlit display; auto backlight off and auto power off for extended battery life
  • Max/Min/Average readings and hold function
  • Highest resolution of 1 μA, measure up to 60 A
  • Selectable filter function removes unwanted noise
  • Forward-facing LED work light for use in dark wiring cabinets
  • CAT III 600V safety rating
  • Internal Memory Logging: up to 65,000 measurement points

Specifications

Fluke 368 FC Leakage Current Clamp Meter

Electrical Specifications
Measurement function Alternating current
AC ampere range 3 mA, 30 mA, 300 mA, 3 A, 30 A, 60 A
mA / A: manual selection
3 mA / 30 mA / 300 mA: automatic selection
3 A / 30 A / 60 A: automatic selection
Range / Resolution 3 mA¹ / 0.001 mA
30 mA / 0.01 mA
300 mA / 0.1 mA
3 A / 0.001 A
30 A / 0.01 A
60 A / 0.1 A
Accuracy – filter activated (40 to 70 Hz), filter off (40 to 1 kHz)² 3 mA – 30 A
60 A
1% + 5 digits
2% + 5 digits
Frequency 40 Hz to 1 kHz
Crest Factor 3
After calibration accuracy is valid for one year. Accuracy is expressed as ± (% of reading + digits). Reference conditions 23 ±5 °C and a maximum relative humidity of 80%.
¹The minimum value is 10 μA rms.
²Outside of the TC / °C 18 °C to 28 °C, 0.02 + 1
Physical
Display (LCD) Digital readout: 3300 count
Display refresh rate 4 times / sec
Maximum conductor diameter 40 mm
Dimensions 234 x 101 x 46 mm
Weight 500 g
Battery 2 AA, IEC LR6, NEDA 15A, alkaline
Battery life Expected battery life, without using backlight and spotlight, is more than 150 hours
Automatic shut-down Meter automatically shuts down after 15 minutes of inactivity
Safety and Environmental Specifications
General safety IEC 61010-1: Pollution Degree 2
Measurement safety IEC 61010-2-032: CAT III 600 V / CAT IV 300 V
Operating temperature -10 °C to +50 °C
Storage temperature -40 °C to +60 °C
Operating humidity Non-condensing (<10 °C)
90% relative humidity (10 °C to 30 °C)
75% relative humidity (30 °C to 40 °C)
45% relative humidity (40 °C to 50 °C)
Protection class IEC 60529: IP30 (jaw closed)
Operating altitude 2000 m
Storage altitude 12000 m
Current sensor action category IEC 61557-13: Class 2, ≤30 A / m
Electromagnetic compatibility (EMC)
International
IEC 61326-1 Industrial Electromagnetic Environment
CISPR 11 Group 1 Class B
Group 1 Generated inside the equipment and / or use radio frequency energy associated with conducting the energy for the device’s own internal functions is essential.
Class B Equipment for home appliances and residential buildings directly connected to a low voltage power supply network equipment. When this device is connected to a test object, it may exceed the emission levels produced by CISPR 11 requirements.
Korea (KCC): A type of equipment (radio and communication equipment industry)
Class A This product meets the requirements of industrial electromagnetic equipment, vendors or users should be aware of this. This device is intended for use in a commercial environment, instead of the home environment.
USA (FCC): 47 CFR 15 B Subpart. In accordance with section 15.103 provides that the products are considered tax-free device.

Included

Fluke 368 FC Leakage Current Clamp Meter

  • Leakage Clamp Meter
  • Safety manual
  • Soft case
  • Batteries: 2 AA

Resources

Fluke 368 FC Leakage Current Clamp Meter – Catalog    Download

Accessories

Fluke 368 FC Leakage Current Clamp Meter

  • Fluke 368 has a large 40 mm diameter jaw for work with large conductors. The clamp’s jaw is fully shielded to accurately capture very small leakage signals, and to minimize external electromagnetic interference.

2 reviews for Fluke 368 FC Leakage Current Clamp Meter

  1. Rated 5 out of 5

    DEBASHIS NABAGATA DESIGN STUDIO

    Great Meter.

  2. Rated 5 out of 5

    DELWAR PRINTING & PACKAGING

    Super tough, reliable and accurate. I’ve always used Fluke and never regretted it.

Add a review

Your email address will not be published. Required fields are marked *