Fluke-787B Process Meter,1000V

Double You’re Power!!!
Fluke 787B Process Meter with 1000V is the most reliable device that you can trust.


Double You’re Power!!!
Solve your problem more situation with Fluke 787B Process Meter.

When you wanted to finish your job safely and on time, there’s a need for reliable devices.
Fluke 787B Process Meter with 1000V is the most reliable device that you can trust.

Fluke 743B does the work of several tools sourcing, simulating and measuring pressure, temperature, and electrical signals in one rugged, hand-held device.

For documentation, the 743B automates calibration procedures and captures your data.

And surely, Fluke 743B helps you meet rigorous standards like ISO 9000, FDA, EPA and OSHA regulations.

The 743B has a PC interface that lets you download procedures, lists, and instructions created with software-or upload data for printing, archiving, and analysis. With its expanded memory, the 743B can hold a full week of calibrations and procedures.


  • 20 mA dc current source/measure/simulate
  • Simultaneous mA and % of scale readout
  • DMM designed to meet 1000 volt IEC 61010 CAT III and 600 V CAT IV standards
  • Fluke Connect® compatibility for wireless data logging (with IR3000FC module*)
  • Precision 1000 V, 440 mA true-rms digital multimeter
  • Frequency measurement to 20 kHz
  • Min/Max/Average/Hold/Relative modes
  • Diode test and continuity beeper
  • Manual step (100%, 25%, Coarse, Fine) plus Auto Step and Auto Ramp
  • Externally accessible battery for easy battery changes


Current Measurement
Range:  0-1 A
Resolution:  1 mA
Accuracy:  0.2% + 2 LSD
Range:  0-30 mA
Resolution:  0.001 mA
Accuracy:  0.05% + 2 LSD
Current Sourcing
Range:  0-20 mA or 4-20 mA
Resolution:  0.05% of span
Drive Capability:  500 Ω @ 24 mA
 to 19.999 kHz, 0.005% + 1 LSD
 Beeps for resistance < 100 ohms
Voltage measurement
Range:  0-1000 V AC or DC
Resolution:  0.1 mV to 1.0 V
Accuracy:  0.1% Rdg + 1 LSD (VDC)
Resistance measurement
 to 40 MΩ, 0.2% + 1 LSD
Diode test
 2.4 V shows diode voltage drop
Environmental Specifications
Operating Temperature -20 ºC to 55 ºC
Storage Temperature -40 ºC to 60 ºC
Humidity (Without Condensation)
 95% up to 30 ºC
 75% up to 40 ºC
 45% up to 50 ºC
 35% up to 55 ºC
Temperature Coefficient
 0.05 x (specified accuracy) per ºC (for temperatures < 18 ºC or > 28 ºC)
Safety Specifications
Electrical Safety
 Designed in accordance with IEC 1010-1, ANSI/ISA S82.01-1994 and CAN/CSA C22.2 No. 1010.1-92
Overvoltage category
 IEC 1010-1 CAT III
Maximum voltage
 1000 V rms
Mechanical & General Specifications
 32 x 87 x 187 mm
 369 g
 Single 9V Alkaline battery (ANSI/NEDA 1604A or IEC 6LR61)
 3 years
Battery Life
 50 hours typical (measurement), 12 hours typical (sourcing 12 mA)
Shock & Vibration
 Random, 2g, 5-500 Hz
 1 meter drop test
Display current and % of span
Auto step, auto ramp


  • AC70A Alligator Clips
  • C81Y Protective Yellow Holster with Flex-Stand™
  • One 9V alkaline battery
  • Quick Reference Guide
  • TL75 Safety-Designed Test lead Set


Fluke-787B Process Meter,1000V – Catalog    Download


Process Tools
Fluke PV350 Pressure Vacuum Module PV350
Temperature Probes
Fluke 80PK-3A Surface Probe 80PK-3A

Flat Surface Temperature Probe.


There are no reviews yet.

Be the first to review “Fluke-787B Process Meter,1000V”

Your email address will not be published. Required fields are marked *