Fluke 805 FC Vibration Meter

Rated 5.00 out of 5 based on 1 customer rating
(1 customer review)

Fluke 805 FC Vibration Meter.

The reliable way to check bearings and overall vibration
The fast, easy to use.

Overview

Reduce maintenance time and increase uptime

Fluke 805 FC Vibration Meter
The reliable way to check bearings and overall vibration
The fast, easy to use.

Fluke 805 FC Vibration Meter eliminates the confusion of vibration screening so you can make go or no-go maintenance decisions with confidence.

Frontline mechanical troubleshooting teams have a highly reliable, repeatable and accurate way to check bearing & overall machine health.

Instantly upload your data to the Fluke Connect app and share vibration measurement results with your maintenance team in original time all without leaving the field.

Fluke 805 Vibration Meter is the most reliable vibration screening device available for frontline mechanical troubleshooting teams that need repeatable, severity-scaled readings of overall vibration and bearing condition.

Use the Fluke 805 for overall vibration measurement (10 Hz to 1,000 Hz) for acceleration, velocity and displacement units of measurement for a wide variety of machines.

External accelerometer support for hard to reach locations. Flashlight for viewing measurement locations in dark areas. Large screen with high resolution for easy navigation and viewing.

Fluke Vibration and Alignment Tools
When vibration increases beyond normal levels, it may be a sign of alignment issues or source of trouble and you need fast and actionable answers.

Fluke Vibration Testing and Laser Shaft Alignment Equipment and Systems were designed specifically for maintenance professionals who need to quickly perform vibration analysis and evaluate alignment to understand the root cause of equipment condition.

Get Your Trusted Brand product from Fluke Bangladesh. We Provide the best Fluke equipment that you are always looking for.

Features

What makes the Fluke 805 FC the most reliable vibration screening device available?

  • Innovative sensor design minimizes measurement variations caused by device angle or contact pressure
  • Consistent data quality at both low and high frequency ranges
  • Four-level severity scale assesses urgency of problems for overall vibration and bearing condition
  • Exportable data via USB
  • Trending in Microsoft® Excel using pre-built templates
  • Overall vibration measurement (10 Hz to 1,000 Hz) for acceleration, velocity and displacement units of measurement for a wide variety of machines
  • Crest Factor+ technology provides reliable bearing assessment using direct sensor tip measurements between 4,000 Hz and 20,000 Hz
  • Compare vibration levels with ISO-10816 severity scales and store results to the Fluke Connect Cloud
  • Get authorization to take next steps in an instant if machine health is at risk via Fluke Connect™ Share-Live™ video call*
  • Colored lighting system (green, red) and on-screen comments indicate how much pressure needs to be applied to take measurements
  • Temperature measurement with Spot IR Sensor increases diagnostic capabilities
  • On-board memory holds and saves up to 3,500 measurements
  • External accelerometer support for hard to reach locations
  • Flashlight for viewing measurement locations in dark areas
  • Large screen with high resolution for easy navigation and viewing

Specifications

Low frequency range (overall measurement) 10 Hz to 1,000 Hz
High frequency range (CF+ measurement) 4,000 Hz to 20,000 Hz
Severity levels Good, satisfactory, unsatisfactory, unacceptable
Vibration limit 50 g peak (100 g peak-peak)
A/D converter 16-bit
Signal to noise ratio 80 dB
Sampling rate Low frequency: 20,000 Hz
High frequency: 80,000 Hz
Real time clock backup Coin battery
Sensor
Sensitivity 100 mV g ± 10%
Measurement range 0.01 g to 50 g
Low frequency range (overall measurement) 10 Hz to 1,000 Hz
High frequency range 4,000 Hz to 20,000 Hz
Resolution 0.01 g
Accuracy At 100 Hz ± 5% of measured value
Amplitude Units
Acceleration g, m/sec²
Velocity in/sec, mm/sec
Displacement mils, mm
Infrared Thermometer (Temperature Measurement)
Range -20 °C to 200 °C (-4 °F to 392 °F)
Accuracy ±2 °C (4 °F)
Focal length Fixed, at ~3.8 cm (1.5″)
External Sensor
Note: Fluke supports but does not provide external sensors
Frequency range 10 Hz to 1,000 Hz
Bias voltage (to supply power) 20 V dc to 22 V dc
Bias current (to supply power) Maximum 5 mA
Firmware
External interfaces USB 2.0 (full speed) communication
Data capacity Database on internal flash memory
Upgrade Through USB
Memory Up to 3,500 measurements
Radiated Emission
Electrostatic discharge: burst Standard EN 61000-4-2
Electromagnetic interference Standard EN 61000-4-3
RE Standard CISPR 11, Class A
Environmental
Operating temperature -20 °C to 50 °C (-4 °F to 122 °F)
Storage temperature -30 °C to 80 °C (-22 °F to 176 °F)
Operating humidity 10% to 95% RH (non-condensing)
Operating/storage altitude Sea level to 3,048 meters (10,000 feet)
IP rating IP54
Vibration limit 500g peak
Drop test 1 meter
General Specifications
Battery type AA (2) Lithium Iron Disulfide
Battery life 250 measurements
Size (L x W x H) 24.1 cm x 7.1 cm x 5.8 cm
(9.5 in x 2.8 in x 2.3 in)
Weight 0.40 kg (0.89 lb)
Connectors USB mini-B 7-pin, external sensor jack (SMB connector)

Includes

  • USB cable
  • Storage case
  • Belt holster
  • Quick reference guide
  • CD-ROM (includes MS Excel template and documentation)
  • Two (2) AA batteries

Resources

Fluke 805 FC Vibration Meter – Catalog    Download

Accessories

Compatible Products
Model Name Description
Fluke 805ES Fluke 805ES

1 review for Fluke 805 FC Vibration Meter

  1. Rated 5 out of 5

    Tanvir

    One of the best accurate product ever I have been used yet. this vibration meter always shows the accurate result. Not only the accuracy but also the value is spot on. I have been used vibration meter for a long time. This vibration meter never makes me upset. always happy to use fluke vibration meter.

    • Fluke Bangladesh

      Thank you, Tanvir for your feedback. We are more than happy when we saw the great feedback for our customer. You one of them. We are always with you people for support all the time. Thank you.

Add a review

Your email address will not be published. Required fields are marked *